The Eemax EX160T Series Two Electric Tankless Water Heater with Single Thermostatic
Control. This unit is ideal for serving an entire condo, apartment, smaller house
or cabin. It would replace the existing tank type water heater, being fed with
cold water only. Minimum switch on flow rate 0.75 GPM. Easily adjustable thermostat
gives exact temperature control.
Eemax EX160T Series Two Electric Tankless Water Heater with Single Thermostatic
Control Features:
•Available thermostatic control "TC" helps insure accurate
outlet temperatures (±0.5°F). Hot or Cold water feed.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local
codes).
• Easy Installation - only one cold water line need be brought to lavatory
- integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste - flow switch activates heater only on demand (no standby
heat loss).
• Designed for Durability - constructed of high strength reinforced "ENGINEERING
PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat
transfer and extended element life.
• Reduces calcification.
• Field Serviceable Elements replaceable cartridge element
• Unit must be mounted on wall.
Eemax EX160T Series Two Electric Tankless Water Heater with Single Thermostatic
Control Applications:
• Residential Showers
• Industrial Processes
• Photo Processing
• Adjustable, Precise Temperature Setting ±0.5°F
• Anti-scald Protection
• (TC) Only- Solar Back-up
Eemax EX160T Series Two Electric Tankless Water Heater with Single Thermostatic
Control Specifications:
• Dimensions 10" x 9" x 3"
• Weight 8 lbs
• Volts 277V
• KW 16.0kW
• Amps 58(2x29)A
• Rise at 1.5 GPM 73°F
• Rise at 2 GPM 55°F
• Rise at 3 GPM 36°F
• Wire Size AWG 10
• Element - Dual replacement cartridge inserts
• Connections: 1/2" compression at bottom of unit
• The voltage, amperage, and circuit breaker specifications must be met
for this heater to function. Please make sure all requirements are met before
purchasing this heater. Manufacturer's start up procedures must be observed.
Note: This unit must have 2 independent electrical circuits using correctly
rated wire and 2 circuit breakers.
Click
Here For Specification
TC=Hot or Cold Water Feed Only
ML=Multi Lavs
Priced for EX160TC
