The Eemax EX75T "Thermostatic" Electric Tankless Water Heater. To serve
as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation.
Applications where precise temperature control is essential such as schools, hospitals
and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash.
Anti-scale protection. Recommended for hot or cold water feed, microprocessor
temperature control for accurate temperature. Fitted with 1/2" copper pipe
compression fittings. Standard range 100 to 140°F. Turn on .7 GPM, max 2 GPM.
Eemax EX75T "Thermostatic" Electric Tankless Water Heater Features:
• Fully Adjustable Temperature Range between 100-140°F. Special settings
of higher or lower range available upon request.
• Eliminate costly mixing valves.
• On Demand Hot Water - no delay.
• Continuous Hot Water - no storage capacity to run out.
• Reduces Installation Cost - no T & P relief valve needed (check local
codes).
• Easy Installation - only one cold water line need be brought to installation
- integral 1/2" compression fittings on bottom (no sweat connections).
• Cut Energy Waste -flow switch activates heater only on demand (no standby
heat loss).
• Thermostatic control reduces wide temperature fluctuation.
• Prevents Legionella Bacteria Growth.
• Meets ANSI Z358.1 Tepid Water Requirements.
• Anti-scald Protection.
• Designed for Durability - constructed of high strength reinforced "ENGINEERING
PLASTIC".
• Ni Chrome Element - a unique, patented flow path ensures optimum heat
transfer and extended element life.
• Compact Size - dimensions 10.75"x5.25"x2.125"; weight
3 lbs.
• Reduces calcification.
• Space Saving Installation - under sink, point-of-use.
• Field Serviceable Element - replaceable cartridge element.
• Complies with handicap requirements.
Eemax EX75T "Thermostatic" Electric Tankless Water Heater Applications:
• Boosters (to 180° F)
• Metering and sensor faucet compatible
• Low volume shower handset (.7 - 2 GPM)
• Schools/Hospitals/Nursing Homes/Laboratories
• Eliminate wait for hot water, long pipe runs
• Maintains accurate temperature continuously +/- 0.5°F
Eemax EX75T "Thermostatic" Electric Tankless Water Heater Specifications:
• Dimensions 10.75" x 5.25" x 2.125"
• Weight 3 lbs
• Volts 240V
• KW 7.5kW
• Amps 32A
• Rise at 0.75 GPM 68°F
• Rise at 1.0 GPM 51°F
• Rise at 1.5 GPM 34°F
• Wire Size AWG 10
• Element - Replaceable cartridge insert
• Connections: 1/2" compression
Eemax EX75T "Thermostatic" Electric Tankless Water Heater Thermostat
Accuracy:
• Thermostatic board maintains +/-0.5°F accuracy.
• Achieves full, pre-selected outlet temperature within 10 seconds after
activation.
• Maintains consistent temperature.
• Units can be used at 208V with 25% reduced output.
• The voltage, amperage, and circuit breaker specifications must be met
for this heater to function. Please make sure all requirements are met before
purchasing this heater. Manufacturer's start up procedures must be observed.
Click
Here For Specification
TS- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
ML- Multi Lav Ideal for one, two, three, lavs @ 5GPM. Will Maintain constant
temp.
EE- Emergency Eye Wash. Specify for Tepid Water requirements
Priced for EX75TS
