The Eemax EX180T2T "Three Phase" Electric Tankless Water Heater.
Designed for cold or hot water feed use in Commercial and Industrial applications.
Designed to turn on in stages based on flow, will maintain precise outlet temperature.
.7 GPM turn on. Max 4 GPM.
Eemax EX180T2T "Three Phase" (Triple Module) Thermostatic Satged
Turn On
Specifications:
• Cold or Hot Feed
• Volts 208V
• Delta Configuration
• KW 18kw
• 208/120V requires: 3 lives, 1 ground (earth) (no neutral)
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth)
• 50A/phase
• Recommended Wire Size 6AWG
• Rise at 2 GPM 61°F
• Rise at 3 GPM 41°F
• Rise at 4 GPM 32°F
• Weight 15 lbs
• The voltage, amperage, and circuit breaker specifications must be met
for this heater to function. Please make sure all requirements are met before
purchasing this heater. Manufacturer's start up procedures must be observed.
•All Eemax Three-Phase units are custom made to order and as such are,
non-returnable and non-refundable. We urge you therefore to check your electrical
supply, making sure all criteria for operating your Eemax water heater are met,
especially that a neutral line is availablefor all 480Y/277V.
Click
Here For Specifications
Options:
EX180T2T 208/120V- no neutral leg, 18 kw, 50A/phase, 6AWG wire
EX180T2T 480/277V- neutral leg required, 18 kw, 22A/phase, 10AWG wire
Specification Options:
S- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
ML-Multi Lavs temp setting 105°-110° .5turn on up to 8 lavs
EE- Emergency Eye Wash. Specify for Tepid Water requirements
Priced for EX180T2T S 208/120V- no neutral leg, 18 kw, 50A/phase, Sanitation
setting 180°
