The Eemax EX240T3 "Three Phase" Electric Tankless Water Heater. Designed
for cold or hot water feed use in Commercial and Industrial applications. Used
for a booster or where very accurate water temperature is required.
1.8 GPM turn on. Max 5 GPM.
Eemax EX240T3 "Three Phase" (Triple Module) Thermostatic Parallel
Turn On
Specifications:
• Cold or Hot Feed
• Volts 208V
• Delta Configuration
• KW 24kw
• 208/120V requires: 3 lives, 1 ground (earth) (no neutral)
• 480Y/277V requires: 3 lives, 1 neutral and 1 ground (earth)
• 67A/phase
• Recommended Wire Size 6AWG
• Rise at 2 GPM 82°F
• Rise at 3 GPM 54°F
• Rise at 4 GPM 41°F
• Weight 15 lbs
• The voltage, amperage, and circuit breaker specifications must be met
for this heater to function. Please make sure all requirements are met before
purchasing this heater. Manufacturer's start up procedures must be observed.
•All Eemax Three-Phase units are custom made to order and as such are,
non-returnable and non-refundable. We urge you therefore to check your electrical
supply, making sure all criteria for operating your Eemax water heater are met,
especially that a neutral line is availablefor all 480Y/277V.
Click
Here For Specifications
Options:
EX240T3 208/120V- no neutral leg, 24kw, 67A/phase, 6AWG wire
EX240T3 480/277V- neutral leg required, 24kw, 29A/phase, 10AWG wire
Specification Options:
S- Sanitation setting 180°
FS- Factory Set temp. (ambient to 180°)
EE- Emergency Eye Wash. Specify for Tepid Water requirements
Priced for EX240T3S 208/120V- no neutral leg, 24kw, 67A/phase, Sanitation
setting 180°
